Det finnes ingen tilgjengelige oversettelser.

CornerTape

CornerTape - How to...

	Always start with the corners first. Peel back the white backing paper for approx. 30cm revealing the silver tapes.		Place the roll flush against the wall, crease in the corner. Start with overlapping the premasked corners and attach the tape.
	Use the CornerTape grip with the thumb inside the core and the index finger on the outside. Remove the backing paper whilst rolling the tape down the wall.		Place the forming tool in the corner preventing dislocation of the tape and unfold to the opposite wall. Repeat every 50 cm and then run your finger to ensure the tape attaches properly.
	Remove the plastic film. Only the metal tape should be left on each side.		Remember to apply CornerTape to all the corners before applying the silicone. Apply silicone in the preset gap between the two perfectly parallel silver tapes.
	Smooth the whole joint using the enclosed joint former. Keep the former at a fixed angle, slightly downwards.		Gently remove the CornerTape: The perfect finish!

	Simply wipe the surface clean. Do not leave the package open - this will dry out the wipes.

	Place the Silicone Remover all the way into the corner and simply push the silicone off.		If more convenient, you can also choose to pull the silicone off.
	Or simply scrape the sealant off with the back of the tool.

To remove residual sealants from uneven surfaces, we reccommend the Residue Remover.

	Simply pull off the old silicone or residual grout ...		...push...
	...or scrape.

	Simply brush off the old residual silicone from the unevent tiles. To prevent damage, test the product on a small hidden area. If scratches appear, stop brushing immediately.

Keep the spatula in an even

angle the whole way down

the bead of sealant,

applying a little pressure.

The thick triangle will scoop
up the access sealant.

The thin triangle is perfect for
smoothing sealants in corners.